1. Home
  2. Scooter-Unicycles-Skateboards & Accessories
  3. 3Shul VESC Motor Controller CC1000 4.1

3Shul VESC Motor Controller CC1000 4.1

  • $1,375
Zoom image

3Shul VESC Motor Controller CC1000 4.1

  • $1,375


Trustpilot
  •   Please call 415.341.2281 7 days a week for a price quote -  We can do even higher voltages)
  • Standard wiring harness now included by default.

CC1000 specs
Rated voltage: 48-168V * more voltage upon request
Battery specs: 8-40s  * more voltage upon request
Battery amps : 500 A  * more current upon request
Phase amps: 1000 A  * more current upon request


Features:

  • Field Weakening and MTPA (Maximum Torque Per Amp) are supported
  • Internal Bluetooth module 
  • IMU for self-balancing applications (Onewheel, EUC, Robotics)
  • Plenty of CPU resources are left so you can make your apps for the controller
  • Powered By STM32F4 microcontroller Running at 168MHZ
  • Sensored and sensor-less FOC with auto-detection of all motor parameters
  • Current and voltage measurement on all phases
  • Variable Regenerative braking
  • Brushless, brushed DC motors, IPM motors are supported
  • A GUI that is easy on the eyes
  • Adaptive PWM frequency to get as good ADC measurements as possible
  • Good start-up torque in the sensor-less mode
  • The motor is used as a tachometer, which is good for odometry
  • Duty-cycle Control, Speed Control, Current Control, and Position Control
  • Seamless 4-quadrant operation
  • Interface to control the motor: PPM signal (RC servo), analog, UART, I2C, USB or CAN-bus
  • Consumed and regenerated amp-hour and watt-hour counting
  • Optional PPM signal output. Useful when e.g., controlling an RC car from a raspberry pi or an Android device
  • The USB port uses the modem profile, so an Android device can be connected to the motor controller without rooting
  • Adjustable protection against
    • Low input voltage
    • High input voltage
    • High motor current
    • High input current
    • High regenerative braking current
    • Rapid duty cycle changes (ramping)
    • High RPM (separate limits for each direction)
  • When the current limits are hit, a soft back-off strategy is used while the motor keeps running. If the current becomes way too high, the motor is switched off completely.
  • The RPM limit also has a soft back-off strategy.
  • Realtime Data logging and Monitoring.
Specifications:
  • Size: 215x155x76mm "8.5" x 6.1 x 3"
  • Voltage: CC1000 (36-170 v (8-40s) 
  • Current: Continuous max 500A Battery, 1000A Phase (Values depend on the mounting and ambient temperature around the device!)
  • Support BLDC square wave mode control and FOC sine wave mode.
  • Firmware: latest (firmware update supported)
  • ERPM:150000
  • Control Interface Ports: USB, CAN, UART, Bluetooth
  • Supported Sensors:  ABI, HALL, AS5047, AS5048A, Sensor-less
  • Input Set Support: PPM, ADC, NRF, UART
  • Circular Bus Bar Size: 10mm (Diameter)
  • Gyroscope and Accelerometer (BMI160)
  • Programmable: Yes

User Manuals, Firmware, Cad Files Click here 

You must register your 3shul within 7 days of receiving your unit.  First, create a user account here, then navigate to the warranty claim page if you have an issue.   

3 Month Warranty on all 3shul products.  See our warranty page for more info.

 

Bluetooth password for 3shul #147258

Download the newest version of VESC-TOOL: https://vesc-project.com/vesc_tool

For setup and resources:
https://www.youtube.com/watch?v=cal_N2W6OsE&t=150s
https://www.youtube.com/results?search_query=vesc+setup
https://vesc-project.com/forum
https://discord.com/invite/JgvV5NwYts
https://www.facebook.com/groups/electricskate/
https://www.facebook.com/groups/671947930216764
https://www.facebook.com/groups/1085801565773033 

Based on Vesc by VESC®-Project. VESC is a registered TM, owned by Benjamin Vedder"